S45C

2023年6月7日

山洞金物店のコメント:鉄に炭素量が0.45%程度入った材料です。焼き入れするとHRC60程度になる。割れるので、焼き鈍してHRC20程度で使う。調質です。

以下のページは、「Bing AI」の回答です。間違っている可能性も有ります。
正解は、JISや製造メーカーなどのページを活用してください。


「Bing AI」の説明:S45Cは、炭素鋼の一種で、機械構造用鋼として広く用いられています。S45Cは、炭素含有量が0.42~0.48%の範囲にあることが特徴です。この炭素含有量により、S45Cは高い強度と硬度を持ち、焼入れや焼きなましに適しています。S45Cは、自動車や建設機械などの部品や工具に使用されることが多く、耐摩耗性や耐疲労性にも優れています。S45Cは、JIS規格に基づく呼び方であり、他の国では異なる呼び方があります。例えば、アメリカではAISI 1045、ドイツではDIN C45、中国ではGB 45と呼ばれています。

山洞金物店のコメント:S45Cの熱処理は、焼き入れ焼き戻しと言わないで、調質が多い。


「Bing AI」の説明:S45C is a medium carbon steel that is widely used in various applications. It has good strength and toughness, as well as excellent machinability and weldability. In this blog post, I will introduce some of the properties and applications of S45C steel, and compare it with other similar grades of steel.

S45C steel belongs to the JIS G4051 standard, which specifies carbon steels for machine structural use. It has a carbon content of 0.42-0.48%, a manganese content of 0.60-0.90%, and a silicon content of 0.15-0.35%. It can be heat treated to achieve different hardness levels, ranging from 167 to 229 HB (Brinell hardness). It can also be quenched and tempered to obtain higher strength and wear resistance.

One of the main advantages of S45C steel is its versatility. It can be used for various applications, such as shafts, gears, bolts, nuts, couplings, pins, rollers, springs, etc. It can also be forged, cold drawn, or hot rolled into different shapes and sizes. Moreover, it has good machinability and weldability, which means it can be easily cut, shaped, and joined by various methods.

However, S45C steel also has some limitations. It is not suitable for applications that require high corrosion resistance or low temperature toughness. It may also suffer from distortion or cracking during quenching or tempering if not done properly. Therefore, it is important to choose the appropriate heat treatment and welding conditions for S45C steel.

Another aspect to consider when using S45C steel is how it compares with other similar grades of steel. For example, AISI 1045 is a common equivalent grade of S45C steel in the American standard. It has similar chemical composition and mechanical properties as S45C steel, but it may have slight differences in dimensional tolerances and surface finish. Another equivalent grade is EN C45 in the European standard, which has a lower carbon content of 0.40-0.50% and a higher manganese content of 0.80-1.20%. It may have better ductility and weldability than S45C steel, but lower strength and hardness.

In conclusion, S45C steel is a medium carbon steel that has good strength and toughness, as well as excellent machinability and weldability. It can be used for various applications that require moderate mechanical performance and dimensional accuracy. However, it is not suitable for applications that require high corrosion resistance or low temperature toughness. It also needs to be heat treated and welded carefully to avoid distortion or cracking. Finally, it can be compared with other similar grades of steel to find the best option for each specific application.

DeepLで翻訳:S45Cは中炭素鋼で、様々な用途に広く使用されています。良好な強度と靭性、そして優れた被削性と溶接性を備えています。今回のブログでは、S45C鋼の特性や用途を紹介し、他の類似鋼種との比較も行います。

S45C鋼は、機械構造用炭素鋼を規定するJIS G4051規格に属します。炭素含有量は0.42~0.48%、マンガン含有量は0.60~0.90%、ケイ素含有量は0.15~0.35%である。熱処理により、167~229HB(ブリネル硬度)の硬度を得ることができます。また、より高い強度と耐摩耗性を得るために焼入れと焼戻しが可能です。

S45C鋼の主な利点の1つは、その汎用性です。シャフト、ギア、ボルト、ナット、カップリング、ピン、ローラー、スプリングなど、さまざまな用途に使用することができる。また、鍛造、冷間引抜き、熱間圧延でさまざまな形状やサイズに加工することができます。さらに、機械加工性や溶接性も良好で、さまざまな方法で簡単に切断、成形、接合することができる。

しかし、S45C鋼にはいくつかの制限もあります。高い耐食性や低温靭性が必要な用途には適しません。また、焼入れや焼戻しが適切に行われないと、歪みや割れが発生することがあります。したがって、S45C鋼の熱処理や溶接条件を適切に選択することが重要である。

S45C鋼を使用する際に考慮すべきもう一つの点は、他の類似グレードの鋼との比較です。例えば、AISI 1045は、アメリカ規格のS45C鋼の一般的な同等グレードである。これはS45C鋼と同様の化学組成と機械的特性を有していますが、寸法公差や表面仕上げに若干の違いがある場合があります。もう一つの同等グレードはヨーロッパ規格のEN C45で、炭素含有量が0.40-0.50%と低く、マンガン含有量が0.80-1.20%と高い。これはS45C鋼よりも延性と溶接性に優れるかもしれませんが、強度と硬度は低くなります。

結論として、S45C鋼は中炭素鋼であり、良好な強度と靭性を持ち、加工性と溶接性にも優れています。適度な機械的性能と寸法精度が要求される様々な用途に使用することができます。ただし、高耐食性や低温靭性が必要な用途には適しません。また、歪みや割れを避けるために、熱処理や溶接に注意する必要があります。最後に、他の類似の鋼種と比較することで、それぞれの特定の用途に最適な選択肢を見つけることができます。

山洞金物店のコメント:世界を相手にすると、「JISで考える」と規定するのが楽でしょうか?


このページは、「Bing AI」で、考察しています。
詳しくは、JISや製造メーカーなどのページを活用してください。


材料が必要な時は、S45C黒皮丸棒 販売規格 – 金属材料販売の山洞金物店 (sandoh.net)に飛んでください。

買い方 売り方 案内

無料会員登録請求⇒会員登録回答⇒見積り請求⇒見積り回答⇒注文⇒請求⇒送金⇒発送
(■お客様の作業 ■当店の対応)  詳細は、材料販売方法で。

手順1 まず会員登録してください。

無料会員登録 – 金属材料販売の山洞金物店 (sandoh.net)

手順2 必要なサイズと数量で見積請求してください。

見積請求 – 金属材料販売の山洞金物店 (sandoh.net)

手順3 メールで見積内容が届く

注文するなら、「注文」とメールしてください。
中止するなら、「見送り」とメールしてください。
検討したい時は、「検討中」メールしてください

電話対応は、できません。
不明点は、無料会員登録して、お問い合わせでお送りください。
材料で困った時は、無料会員登録して、材料の困り事募集でお送りください。

値段を調べるなら

方法は2通り
日々の見積回答で検索して、値段、価格を調べてください。
金属の小物販売店 で、値段、価格を調べてください。